110V Wiring Guide using PWR-TRAFO Kit transformer (for 1U)

owel · **Posted:** Sun Jan 27, 2008 4:57 pm

Notes:

For the transformer primary, 110V operation,
connect the GRAY and BROWN wires together.
Connect the BLUE and VIOLET wires together.
Follow diagram above:

For the transformer secondary,
connect RED and ORANGE wires together, connect to "CT" pad of PSU
connect BLACK to "AC1" pad of PSU
connect YELLOW to "AC2" pad of PSU

guitarguy12387 · **Joined:** Tue Jun 17, 2008 8:33 pm **Posts:** 96

Hey, sorry i'm bein kinda a pain with all these posts. But does the orientation of the switch matter?

owel · **Posted:** Thu Jul 03, 2008 7:59 pm

guitarguy12387 wrote:

Hey, sorry i'm bein kinda a pain with all these posts. But does the orientation of the switch matter?

Not really. If you get it wrong, the ON position will be down instead of up. It's just a matter of flipping the switch around, (or desoldering the wires and soldering it to the opposite side.) ... personally, flipping the switch around is easier.

Looking at the switch, solder using the middle and bottom terminals.

DIY Mic Pre Kits, Lunchbox Mic Preamp Kits, Power Supply Kits

110V Wiring Guide using PWR-TRAFO Kit transformer (for 1U)

Who is online