Scott Alger wrote:
I can see that you went to a lot of trouble here...My apologies
Hey, no problem at all.
I installed unbalanced outputs on the two preamps,using output from
pins 1 and 2 to phone jacks. The sc1MkII unbalanced out works fine.
The SC-1 does not have transformer outputs. It instead uses THAT OutSmarts(tm) technology. So hooking up pin1 (gnd) and pin2 to a jack will work just fine.
The X12 for some reason does not. Hooking up the X12 balanced works
The X-12 have a transformer output. If you need to connect a balanced transformer output to an unbalanced input, use pin 2 and pin 3.
Check out Rane's interconnection guide.http://www.rane.com/note110.html
So nothing wrong with the preamp, sorry for any confusion here.
Whew! Glad it's all sorted out!